Protime Elite Decoder
Description Protime Elite Decoder
The Protime Elite decoder is especially used in races that not require a resolution less than 1/1000th of a second.
The decoder stores all competitors passings on SD card, allow to restore, in case of problems, missed passings.
An internal battery ensures the functioning of the decoder during a power failure. The autonomy of this battery is 2 hours.
The graphic OLED display shows useful information such as the noise level, the loop detection level, the latest transponder number identified. It also displays the race time or day time, which can be synchronized by GPS or by the computer.
The decoder has a TCP/IP and RS232 interface for the communication with the computer.
Features Protime Elite Decoder
Connections :
- 2 loops input (track loop and pitlane loop)
- 1 cell input
- 1 manual input (to simulate a transponder passing)
- 1 audio output (beep for each transponder passing)
- 1 AUX output (intermediate loops, red lights, horn)
- 1 RS232 output
- 1 TCP/IP output
Specification :
- GPS Synchronization
- SD Card (stores competitors passings)
- Intermediate loops (1 to 32)
- Clock stability : Oscillator TCXO 0.5 ppm
- Power : 12 VDC via adapter
- Temperature range : -20 à 55 °C (-4 à 131 °F)
- Dimensions : 160 x 100 x 52 mm (6.3 x 3.9 x 2 in)
- Resolution : 0.001 s
Detection loop :
- Maximum width of the track (passive loop) : 25 m (82 ft)
- Maximum width of the track (active loop) : 10 m (33 ft)
- Maximum lenght of the coaxial cable : 100 m (330 ft)
3 years warranty
